| Author |
My DS10L is dead |
onedbguru
Member
Posts: 3
Location: Annapolis, MD
Joined: 29.12.07 |
| Posted on December 22 2010 16:26 |
|
|
Does anyone have the maintenance manual that tells you what the beeps are when powering up. When it crashed, there was a constant stream of SYSTEM EVENT 06??? (vt520 console - no printer). Now when it powers up, it beeps 7 7 6 and left-most orange light + the power light are lit - nothing on the console.
Thanks!
Michael Austin, CISSP |
|
|
| Author |
RE: My DS10L is dead |
abrsvc
Member
Posts: 108
Joined: 12.03.10 |
| Posted on December 23 2010 01:25 |
|
|
The beep codes:
1-2-3 Valid firmware image not found
4 Valid ROM header not found
6 Memory error (or bad checksum) detected
7 DIMMs in a memory bank do not match
It looks like you have a bad memory module or riser.
Hope this helps,
Dan
|
|
|
| Author |
RE: My DS10L is dead |
onedbguru
Member
Posts: 3
Location: Annapolis, MD
Joined: 29.12.07 |
| Posted on December 23 2010 02:31 |
|
|
Dan,
Is there a PDF docs that have other error codes etc that you can share?
M.
Michael Austin, CISSP |
|
|
| Author |
RE: My DS10L is dead |
malmberg
Moderator
Posts: 530
Joined: 15.04.08 |
| Posted on December 23 2010 05:11 |
|
|
It may be this issue:
http://labs.hoffmanlabs.com/node/441
Please also read the ITRC forum link about the DS15.
http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1256015
The DS10[L] is very similar to the DS15. I would recommend comparing the online documentation for any differences.
I have a motherboard in the same condition that I would like to get working, so please let us know if you are successful. |
|
|
