| Author |
RE: Upgrade question - part 2 |
iamcamiel
Moderator
Posts: 25
Location: Wageningen, The Netherlands
Joined: 06.04.08 |
| Posted on September 17 2013 23:22 |
|
|
|
Correct. |
 |
| Author |
RE: Upgrade question - part 2 |
Paolo_R
Member
Posts: 64
Joined: 16.08.13 |
| Posted on September 18 2013 14:20 |
|
|
Here is the modified set up:
$ sh network
Product: DECNET Node: A12345 Address(es): 1.1
Product: TCP/IP Node: freeaxp.com Address(es): 10.1.1.20
$ ucx sh interfaces
Packets
Interface IP_Addr Network mask Receive Send MTU
LO0 127.0.0.1 255.0.0.0 0 0 4096
WE0 10.1.1.20 255.255.255.0 78 2 1500
Pinging 10.1.1.20 gave 'destination host unreachable' and Filezilla gave 'Could not connect to server', WS-FTP gave 'Connect failure'.
What next  ? |
|
|
| Author |
RE: Upgrade question - part 2 |
Bruce Claremont
Moderator
Posts: 623
Joined: 07.01.10 |
| Posted on September 19 2013 02:24 |
|
|
|
What's your gateway IP. Try pinging it from 10.1.1.20. |
|
|
| Author |
RE: Upgrade question - part 2 |
Paolo_R
Member
Posts: 64
Joined: 16.08.13 |
| Posted on September 19 2013 14:40 |
|
|
In making all these changes to my network configuration I discovered that I'd screwed up another virtual machine's set up and FTP ability plus my ability to connect to the internet via my normal ISP. So I have reversed all the changes and restored my original settings. I will forget about FTP on OpenVMS for the time being.
Thanks for your help. |
|
|
